
Cylinder block – Kawasaki M2X170
Quick answer
The Kawasaki M2X170 cylinder block is the piston-bore barrel inside an M2X swing motor used on ~30-ton excavators, where the block face and bores govern swing torque and sealing.
Việt Trung Hải always has JIC and genuine M2X170 blocks to the same code, running straight against the original valve plate, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Kawasaki · M2X
- Model code
- M2X170
- SKU
- 2021-590-1-256
- Condition
- New, correct code
- Availability
- On request
What the M2X170 cylinder block fits
The cylinder block is the barrel holding the piston bores that rotate around the shaft. In the Kawasaki M2X swing motor, high-pressure oil drives the pistons to produce the torque that slews the upper structure. The M2X170 belongs to the swing-motor size used on mid-to-large excavators in the ~30-ton class.
Signs it needs replacing
Weak or jerky swing, drift when parked on a slope, fast oil heating, or a scored block face and tapered bores that let oil slip past the pistons.
Choosing quality
JIC Hydraulics blocks are precision-machined and heat-treated to hold a flat face and round bores over time. Việt Trung Hải, an authorized JIC distributor, always has the M2X170 in JIC form in stock, with genuine Kawasaki alongside it. The JIC block runs against the original valve plate at the right clearance, with no lapping. Send the code for a fast quote.
Frequently asked questions
What excavator size does the M2X170 block fit?
The M2X170 is the cylinder block for a Kawasaki M2X swing motor, typically on mid-to-large excavators around the 30-ton class. Send your machine number and motor code and Việt Trung Hải will confirm the fit and quote quickly.
How do I know the swing-motor block is worn?
Common signs are weak or jerky swing, drift when parked on a slope, fast oil heating, and knocking. On teardown, a scored block face or tapered piston bores confirms it is time to replace the block.
Does the M2X170 block need lapping after fitting?
No. The JIC M2X170 block is made to the same code, with a flat face and round bores held to fitting tolerance, so it runs straight against the original valve plate. Việt Trung Hải is an authorized JIC Hydraulics distributor carrying JIC and genuine blocks, and helps verify the fit before quoting.
Get a quote
Request a quote: Cylinder block – Kawasaki M2X170
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XDrive shaft – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XShoe plate – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XRetainer plate – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XFriction lining – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XValve plate – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XPin – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XBall guide – Kawasaki M2X170M2X170On requestView · get a quoteTechnical handbook