Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Komatsu HPV95

Komatsu · HPV

Cylinder block – Komatsu HPV95

New, correct codeOn requestHPV95

Quick answer

The HPV95 cylinder block is the piston-bore barrel inside the Komatsu HPV main piston pump on Komatsu PC200 excavators, around the 20-ton class.

Việt Trung Hải stocks the HPV95 block from the pump maker and from JIC, each machined to the exact code, with a fast quote once you share the pump number and machine model.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Komatsu · HPV
Model code
HPV95
Condition
New, correct code
Availability
On request

What the HPV95 cylinder block fits

The cylinder block is the barrel holding the piston bores that rotate around the drive shaft, where pistons reciprocate to move oil. The HPV95 block belongs to the Komatsu HPV main piston pump used on Komatsu PC200 excavators, around the 20-ton class. Its face against the valve plate governs sealing and output pressure.

When to replace

A worn block shows as a machine losing power all round: slow boom lift, weak swing and travel, oil heating faster than usual. Scoring or pitting in the bores or on the valve-plate face lets oil leak internally and pressure drop. Metal in the oil or a loud pump whine means it is time to inspect.

Choosing quality parts

Blocks run under high load and friction, so material, surface hardness and bore tolerance must be right. Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks the HPV95 block from the pump maker and from JIC, each to the exact code. The JIC block holds interchange tolerance with the original shaft and valve plate, so it runs true once fitted. Send your pump number and machine model for a fast quote.

Frequently asked questions

Which excavator does the HPV95 block fit?

The HPV95 block belongs to the Komatsu HPV main piston pump, typically fitted on Komatsu PC200 excavators in the 20-ton class. Send your pump number and machine model so Việt Trung Hải can confirm the exact part before quoting.

When should the cylinder block be replaced?

When the machine weakens overall, boom lift slows, swing and travel feel weak, oil heats fast, or metal appears in the oil. These point to a scored or pitted block leaking internally; inspect the block together with the pistons and valve plate.

There is still metal in the oil after an HPV95 block change — what now?

Leftover debris means the tank, lines and cooler were not flushed; before long it circulates back and ruins the new block. Flush the whole system, fit new return and suction filters, run it in, then change the oil again. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the HPV95 block to code.

Get a quote

Request a quote: Cylinder block – Komatsu HPV95

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides